Mini PCI-Express PCI-e to USB 3.0 19pin Built-in Header Card Adapter for Win 7/8

Description

Home
Payment
Shipping
About us
Contact us
Store Categories
Store Categories
Other
Details
Description:
100% brand new and high quality
Main chip: NEC UPD720202 chipset
May have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer Rate: 5000/480/12 / 1.5Mbps
SATA to take power by the board, or you can into a small 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cable to work properly!
This expansion card can only be plugged into the MINI PCI-E interface, can not be used MSATA interface. Please make sure when buying interface, or can not work
Because the first half of NEC 2010 merged with Renesas Electronics, Renesas Electronics accounted for a large share, so now have to drive and LOGO RENESAS. Please know!
On the chip and printed CHINA JAPAN, this is just the chip package in China or Japan, which is still JAPAN wafer production, performance exactly the same, no difference
USB3.0 is double total 20PIN, which has one foot already needle injection foolproof, so called 19PIN.
Please buyers in the purchase be sure to see the notes and instructions below to purchase! !
Because SATA Docking Station are plastic, not iron, so the line is relatively tight, when the harness must withstand plug the cable back transposons, forced plug wire when the transposon will tilt. Remember Remember!
Product advantages:
Expansion card using Taiyo Yuden capacitance, greatly ensure the stability of USB-powered
Working directly with the original, you can provide a strong after-sales technical support, firmware and driver updates earliest. Parents and worry-free card
Product use:
With USB3.0 popularity, more and more chassis provides 20pin USB3.0 interface, there are many DIY enthusiasts to achieve self-install the front panel 20pin USB3.0 interface! MINI PCIE motherboard directly out 19PIN socket interface extensions, you can connect the front panel of the chassis, thus providing ultra-high-speed USB3.0 interface front, very convenient!
Driver Installation Instructions:
The accompanying CD into the CD-ROM into the NEC directory --D720201-2-- Double-click the .exe file inside the next step. When prompted, reboot the computer
As previously installed driver, first in the Control Panel Add or Remove Programs --- - Renesas Electronics USB3.0 Host ControllerDriver uninstall and re-install
Size: 5.1 x 3cm/2*1.18"
Package Included:
1 x Adapter Card
4 x Screws
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only accept your
Ebay Address
,Please Make sure it's 100% right.
The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Payment Method
Returns Policy
copyright © 2018 datacaciques
Home
Payment
Shipping
About us
Contact us
Home
Payment
Shipping
About us
Contact us
Details
Description:
100% brand new and high quality
Main chip: NEC UPD720202 chipset
May have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer Rate: 5000/480/12 / 1.5Mbps
SATA to take power by the board, or you can into a small 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cable to work properly!
This expansion card can only be plugged into the MINI PCI-E interface, can not be used MSATA interface. Please make sure when buying interface, or can not work
Because the first half of NEC 2010 merged with Renesas Electronics, Renesas Electronics accounted for a large share, so now have to drive and LOGO RENESAS. Please know!
On the chip and printed CHINA JAPAN, this is just the chip package in China or Japan, which is still JAPAN wafer production, performance exactly the same, no difference
USB3.0 is double total 20PIN, which has one foot already needle injection foolproof, so called 19PIN.
Please buyers in the purchase be sure to see the notes and instructions below to purchase! !
Because SATA Docking Station are plastic, not iron, so the line is relatively tight, when the harness must withstand plug the cable back transposons, forced plug wire when the transposon will tilt. Remember Remember!
Product advantages:
Expansion card using Taiyo Yuden capacitance, greatly ensure the stability of USB-powered
Working directly with the original, you can provide a strong after-sales technical support, firmware and driver updates earliest. Parents and worry-free card
Product use:
With USB3.0 popularity, more and more chassis provides 20pin USB3.0 interface, there are many DIY enthusiasts to achieve self-install the front panel 20pin USB3.0 interface! MINI PCIE motherboard directly out 19PIN socket interface extensions, you can connect the front panel of the chassis, thus providing ultra-high-speed USB3.0 interface front, very convenient!
Driver Installation Instructions:
The accompanying CD into the CD-ROM into the NEC directory --D720201-2-- Double-click the .exe file inside the next step. When prompted, reboot the computer
As previously installed driver, first in the Control Panel Add or Remove Programs --- - Renesas Electronics USB3.0 Host ControllerDriver uninstall and re-install
Size: 5.1 x 3cm/2*1.18"
Package Included:
1 x Adapter Card
4 x Screws
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only accept your
Ebay Address
,Please Make sure it's 100% right.
The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Payment Method
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
Returns Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.