Late Model Orange 2020 Honda Baretto 712MT Micro Trencher-Low cost shipping*

Description

Newer 2020 Honda Baretto 712MT Micro Trencher-See the first 4 photos, the others are the stock older model. A few changes were made in 2020 to make a good unit even better.
The newer 2020 Baretto is Orange in color compared to the many 2015-2019 that are on eBay in Red
The unit is in Florida, we do not offer a local pickup option, however we have a private truck route we use for another company that we can piggyback the trencher on to reduce shipping by as much as 0.
Normal shipping on this unit is 700 pounds on a double sized pallet can be up to $ 650 and take 1-2 weeks,
However, if you are willing to wait 2-3 weeks we can get it down to $ 250 on our private truck route. Therefore, If you can wait up to 3 weeks for delivery, see photo # 6 to discuss the details
BEFORE BIDDING
.
Low cost shipping to the following states:
Southeast FL AL GA TN SC NC VA AR
Northeast NY MA
West AZ CA CO NV NM TX
Northwest weirdos WA OR UT ID
- Regular service & all maintenance performed. The beauty ALL HYDRAULIC unit is it's self-propelled. Maintenance is only to grease the chain drive sprocket & bearing daily as they stay in the dirt and do all the hard dirty work. Axel bearings, every month or so, are not near as critical. Serving the Honda motor is merely an oil change and air filter clean every 100 hours, spark plug every year or two.  The chain is a wear item good for up to 400 hours, and ours is usually around 200 hours with plenty of life left. You can go even further by removing a link to take up slack if the adjustment screw is turned in all the way.
FEATURES
All-hydraulic design is low maintenance and efficient
Free-wheeling hubs unlock to transport without starting the engine
Automatic wheel drive system adjusts wheel speed to conditions
Hydraulics are easily accessed for maintenance and repair
Simple controls are easy to learn and easy to operate
SPECIFICATIONS
ENGINE:
Honda GX200
DETAILS:
Length: 71.25″
Width: 30.5″
Height: 43″
Wheel Base: 25.25″
Weight: 400 lbs.
Hydraulic Reservoir: 1.5 gallons
Ground Drive Forward: 148 ft/min
Ground Drive Reverse: 23 ft/min
Digging Chain Speed: 200 ft/min
Boom Depth Options: 12 or 18″
Chain Width Options: 3.5 or 4.5″
WHY BARETTO?
DESIGN
The 712MTH micro trencher features a unique automatic wheel drive propulsion system. This trencher utilizes a load sensing hydraulic valve to adjust the trenching wheel speed to the load on the digging chain. When the load on the digging chain increases, the sensing valve sends less oil to the wheel drive motor and the wheel speed will automatically slow down. When the load on the digging chain decreases, the sensing valve sends more oil to the wheel drive motor and the wheel drive speed will automatically increase. This keeps a constant load on the engine, regardless of the depth of cut or differing soil conditions. Not only does this help the trencher run at optimal efficiency, it reduces stress on the components, increasing their longevity.
CONTROLS
The automatic adjustment to the wheel speed eliminates the responsibility on the operator to constantly adjust their wheel speed. Nothing could be easier for the novice user. One control lever operates the wheel drive, and one lever operates the chain drive. After engaging the chain drive lever, the operator just engages the wheel drive lever and lets the trencher do the work. When the wheel drive is in forward, the chain drive will not activate, eliminating costly repairs sometimes caused by inexperienced operators.
ROI
Small trenchers can become one of your leading revenue sources. With a unique design that provides limited need for maintenance and repair, the 712MTH will keep going out into the field time and again without sitting in the shop waiting for repair.